Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Key Properties
- Good mechanical resistance
- Good resistance to atmospheric and chemical degradation
Applications & Uses
- Composites Processing Methods
- Product End Uses
- Markets
- Applications
- Application Information
Encapsulating or potting of low voltage and electronic components
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Processing Method
Casting
- Cured Properties
Key Value Unit Test Method Test Condition Shore D hardness (4 mm plate) 74 - DIN 53 505 at 25°C Glass transition temperature 79 °C DIN 51 005 DSC, Mettler TA 4 000
Tensile strength (max. tensile) 83 MPa ISO/R 527 at 25°C Tensile strength (elongation) 4 % ISO/R 527 at 25°C Elastic modulus in tension 3506 MPa ISO/R 527 at 25°C Water absorption (10 days) 0.43 % ISO 62 at 23°C Water absorption (30 min) 0.16 % ISO 62 at 100°C Dielectric constant ε (50 Hz) 4.1 - DIN 53 483 at 23°C Dielectric constant ε (50 Hz) 5 - DIN 53 483 at 80°C Dielectric constant ε (50 Hz) 5.5 - DIN 53 483 at 100°C Dissipation factor tan δ (50 Hz) 0.4 - DIN 53 483 at 23°C Dissipation factor tan δ (50 Hz) 3.5 - DIN 53 483 at 60°C Dissipation factor tan δ (50 Hz) 11.6 - DIN 53 483 at 100°C Volume resistivity ρ 4×10¹⁵ Ω·cm DIN 53 482 at 23°C Volume resistivity ρ 4×10¹³ Ω·cm DIN 53 482 at 60°C Volume resistivity ρ 6×10¹⁰ Ω·cm DIN 53 482 at 100°C Electrolytic corrosion A-1 - DIN 53 489 - Tracking resistance -0.02 kΩ·cm IEC 112 at 25°C (for 1 mm plate)
Electric strength 28 kV/mm IEC 243 at 23°C (for 1 mm plate, 50 Hz)
Safety & Health
- Handling Precautions
Safety precautions at workplace:
protective clothing : yes
gloves : essential
arm protectors : recommended when skin contact likely
goggles/safety glasses : yes
respirator/dust mask : no
Skin protection : Apply barrier cream to exposed skin
before starting work
after washing : Apply barrier or nourishing cream
Cleansing of contaminated skin : Dab off with absorbent paper, wash with warm water and alkali-free soap, then dry with disposable towels. Do not use solvents
Clean shop requirements : Cover workbenches, etc. with light coloured paper. Use disposable beakers, etc.
Disposal of spillage : Soak up with sawdust or cotton waste and deposit in plastic-lined bin
Ventilation:
of workshop : Renew air 3 to 5 times an hour
of workplace : Exhaust fans. Operatives should avoid inhaling vapours.- First Aid
Contamination of the eyes by resin, Aradur or casting mix should be treated immediately by flushing with clean, running water for 10 to 15 minutes. A doctor should then be consulted. Material smeared or splashed on the skin should be dabbed off, and the contaminated area then washed and treated with a cleansing cream (see above). A doctor should be consulted in the event of severe irritation or burns. Contaminated clothing should be changed immediately. Anyone taken ill after inhaling vapours should be moved out of doors immediately. In all cases of doubt call for medical assistance.
Storage & Handling
- Storage Conditions
Store the components in a dry place at 18-25°C, in tightly sealed original containers. Under these conditions, the shelf life will correspond to the expiry date stated on the label. After this date, the product may be processed only after reanalysis. Partly emptied containers should be tightly closed immediately after use. For information on waste disposal and hazardous products of decomposition in the event of a fire, refer to the Material Safety Data Sheets (MSDS) for these particular products.