Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Features
- High Tg anhydride-cured, toughened system with good compromise between in-mould pre-cure capability and colour for aesthetic carbon look applications
Applications & Uses
- Composites Processing Methods
- Cure Method
- Processing Information
- RTM / HP-RTM
Properties
- Notes
- 1 part DY 079 - 40 min 120° C + 2 h 190 °C
- 2 parts DY 079 - 20 min 120° C + 2 h 190 °C
Technical Details & Test Data
- Properties of The Cured, Neat Formulation
Property Value Unit Test Method At Condition Glass Transition Temperature 195 – 205 °C ISO 11357-2, DSC 5K/MIN Glass Transition Temperature 185 – 195 °C DMA ISO 6721, DSC 2K/MIN Tensile Test Tensile strength 70 – 80 MPa ISO 527 Tensile Test Elongation at tensile strength 4.0 – 5.0 % ISO 527 Tensile Test Tensile modulus 2550 – 2700 MPa ISO 527 Fracture Properties Fracture toughness K1C 0.80 – 0.90 MPa√m ISO 13586 Fracture Properties Fracture energy G1C 230 – 280 J/m² ISO 13586 - Processing Guidelines
Components Parts by weight Parts by volume ARALDITE® LY 1560
100 100 ARADUR® 917 90 118 ACCELERATOR DY 079
2 - 5 1 - 2 - We recommend that the components are weighed with an accurate balance to prevent mixing inaccuracies which can affect the properties of the matrix system.
- The components should be mixed thoroughly to ensure homogeneity. It is important that the side and the bottom of the vessel are incorporated into the mixing process.
Safety & Health
- First Aid Information
- Contamination of the eyes by resin, hardener or mix should be treated immediately by flushing with clean, running water for 10 to 15 minutes.
- A doctor should then be consulted. Material smeared or splashed on the skin should be dabbed off, and the contaminated area then washed and treated with a cleansing cream (see above).
- A doctor should be consulted in the event of severe irritation or burns.
- Contaminated clothing should be changed immediately. Anyone taken ill after inhaling vapours should be moved out of doors immediately. In all cases of doubt call for medical assistance.
Storage & Handling
- Handling Information
Safety Precautions Protective clothing Yes Gloves Essential Arm protectors Recommended when skin contact likely
Goggles/safety glasses Yes Respirator/dust mask Recommended Skin Protection Skin protection before starting Apply barrier cream to exposed skin
Skin protection after washing Apply barrier or nourishing cream
Cleansing of contaminated skin Dab off with absorbent paper, wash with warm water and alkali-free soap, then dry with disposable towels. Do not use solvents
Clean shop requirements Cover workbenches, etc. with light coloured paper. Use disposable breakers, etc.
Disposal of spillage Soak up with sawdust or cotton waste and deposit in plastic-lined bin
Ventilation Ventilation of workshop Renew air 3 to 5 times an hour
Ventilation of workplace Exhaust fans. Operatives should avoid inhaling vapours.
- Storage Conditions
- Provided that Araldite® LY 1560, Aradur® 917 and Accelerator DY 079 are stored in a dry place in their original, properly closed containers at the storage temperatures mentioned in the MSDS they will have the shelf lives indicated on the labels.
- Partly emptied containers should be closed immediately after use. Because Aradur® 917 is sensitive to moisture, storage containers should be ventilated with dry air only.
Other
- Application Information
Value Units Test Method / Conditions Mix Ratio 0.01-0.02 %(W) %(W) Accelerator : Resin Mix Ratio 1.18 %(W) %(W) Hardener : Resin