162 Products found on Huntsman
ARALDITE® 2033 A/B is a room temperature curing, self-extinguishing epoxy adhesive. It has been tested against stringent norms for electronics and railway applications. This adhesive has well-balanced tensile properties: a medium modulus and a high elongation at break. It is suitable for structural applications requiring high strength.
The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.
The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.
ARALDITE® 5049 A/B epoxy adhesive is a two-part laminating system that cures to a transparent bondline. It is ideal for fabricating snow skis, snowboards, and other composite parts, with a heat cure recommended for optimal results.
ARALDITE® AW 136 H / HARDENER HY 994 epoxy adhesive is a two-part laminating system used for fabricating skis, snowboards, and other composite parts. A heat cure is recommended for optimal results. It is an epoxy laminating adhesive.
ARALDITE® AW 136H / HARDENER HW 5067-1 is a two-component, room-temperature curing adhesive with high strength and toughness, good environmental resistance, and excellent chemical resistance. It is used for bonding metals, where higher than normal temperatures or more aggressive environments are expected in service. The performance is excellent after room-temperature curing, but it is further enhanced by a short post-cure at 50-100°C (typically 30-60 minutes).
ARALDITE® B 41 / ARADUR® HT 901 / Mineral Filler is a solid, hot-curing casting resin system for producing castings with good electrical and mechanical end-properties.
ARALDITE® B 41 / ARADUR® HT 903 / Mineral Fillers is a solid, hot-curing casting resin system for producing castings with good electrical and mechanical end-properties.
ARALDITE® CT 2200 / ARADUR® HT 903 / Mineral Filler is a solid, hot-curing casting resin system for producing castings with good electrical and mechanical end-properties.
ARALDITE® CT 2200 / ARADUR® HY 918 / Alumina is a solid, hot-curing epoxy casting resin system in combination with Alumina filler for GIS insulating parts.
ARALDITE® CW 1226-1 / ARADUR® HW 1226-1 is an electrical insulation material. It is also a hot-curing casting resin system with good experience and high crack resistance.
ARALDITE® CW 1304 / ARADUR® HY 5809 is a hot-curing filled epoxy casting and impregnating system
ARALDITE® CW 2243 L Grey / ARADUR® HY 842 is an optimally filled casting system for processing and curing at room temperature or slightly higher temperatures.
ARALDITE® CW 2243-2 L / ARADUR® HY 2966 is an optimally filled casting system for processing and curing at slightly higher temperatures.
ARALDITE® CW 229 / ARADUR® HW 229-1 is a liquid, heat-curing two-component epoxy casting system containing mechanically reinforcing fillers. This system is readily processed into a resilient polymer with excellent mechanical and electrical characteristics. The cured product exhibits exceptional resistance to thermal cycling as well as thermal endurance properties, making it suitable for 200°C applications. This system is recommended for the manufacture of electrically insulating components and for use as electrical insulation for indoor medium and high voltage applications, including SF6 insulated types.
ARALDITE® CW 229-3 / ARADUR® HW 229-1 is a liquid, brown, hot-curing two-component epoxy casting system with excellent crack resistance. It is prefilled with slightly abrasive, mechanically reinforcing fillers.
Show
of 162 results
