Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Composites Processing Methods
- Cure Method
- Product End Uses
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Processing Guidelines
Components Parts by weight Parts by volume Araldite® LY 1564 100 100 Hardener XB 3473 26 30 - We recommend that the components are weighed with an accurate balance to prevent mixing inaccuracies which can affect the properties of the matrix system. The components should be mixed thoroughly to ensure homogeneity. It is important that the side and the bottom of the vessel are incorporated into the mixing process.
- When processing large quantities of mixture the pot life will decrease due to exothermic reaction. It is advisable to divide large mixes into several smaller containers.
- Properties of The Cured, Neat Formulation
Property Value Unit Test Method at Condition Glass Transition Temperature (TG) 70 - 80 °C ISO 11357-2, DSC Cure: 3 h 110°C (LY 1564), 10 K/min
Glass Transition Temperature (TG) 100 - 110 °C ISO 11357-2, DSC Cure: 3 h 120°C (XB 3473), 10 K/min
Glass Transition Temperature (TG) 110 - 120 °C ISO 11357-2, DSC Cure: 3 h 130°C (LY 1564), 10 K/min
Glass Transition Temperature (TG) 165 - 175 °C ISO 11357-2, DSC Cure: 30 min 130°C + 12 h 160°C (XB 3473), 2 K/min
Flexural strength 100 - 110 MPa ISO 178 Cure: 30 min 130°C + 12 h 160°C (LY 1564 / XB 3473)
Ultimate elongation 5.5 - 6.5 % ISO 178 Cure: 30 min 130°C + 12 h 160°C (LY 1564 / XB 3473)
Flexural modulus 2500 - 2700 MPa ISO 178 Cure: 30 min 130°C + 12 h 160°C (LY 1564 / XB 3473)
Fracture toughness (K1C) 0.7 - 0.8 MPa√m ISO 13586 Cure: 30 min 130°C + 12 h 160°C (LY 1564 / XB 3473)
Fracture energy (G1C) 170 - 190 J/m² ISO 13586 Cure: 30 min 130°C + 12 h 160°C (LY 1564 / XB 3473)
Safety & Health
- First Aid Information
- Contamination of the eyes by resin, hardener or mix should be treated immediately by flushing with clean, running water for 10 to 15 minutes.
- A doctor should then be consulted. Material smeared or splashed on the skin should be dabbed off, and the contaminated area then washed and treated with a cleansing cream (see above).
- A doctor should be consulted in the event of severe irritation or burns.
- Contaminated clothing should be changed immediately.
- Anyone taken ill after inhaling vapours should be moved out of doors immediately.
- In all cases of doubt call for medical assistance.
Storage & Handling
- Storage Conditions
- Provided that Araldite® LY 1564 or XB 3473 are stored in a dry place in their original, properly closed containers at the storage temperatures mentioned in the MSDS they will have the shelf lives indicated on the labels.
- Partly emptied containers should be closed immediately after use.
- Handling Information
Safety Precautions Protective clothing Yes Gloves Essential Arm protectors Recommended when skin contact likely
Goggles/safety glasses Yes Respirator/dust mask Recommended Skin Protection Skin protection before starting Apply barrier cream to exposed skin
Skin protection after washing Apply barrier or nourishing cream
Cleansing of contaminated skin Dab off with absorbent paper, wash with warm water and alkali-free soap, then dry with disposable towels. Do not use solvents
Clean shop requirements Cover workbenches, etc. with light coloured paper. Use disposable breakers, etc.
Disposal of spillage Soak up with sawdust or cotton waste and deposit in plastic-lined bin
Ventilation Ventilation of workshop Renew air 3 to 5 times an hour
Ventilation of workplace Exhaust fans. Operatives should avoid inhaling vapours.