Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Advantages
- Ease of mixing
- Complete impregnation of fibers
- Room or elevated temperature curing
- Good mechanical properties
Applications & Uses
- Composites Processing Methods
- Cure Method
- Product End Uses
- Markets
- Applications
- Mixing Ratio
We recommend that the components are weighed with an accurate balance to prevent mixing inaccuracies which can affect the properties of the matrix system. The components should be mixed thoroughly to ensure homogeneity. It is important that the side and the bottom of the vessel are incorporated into the mixing process.
Note: when processing large quantities of mixture the pot life will decrease due to exothermic reaction. It is advisable to divide large mixes into several smaller containers.- Product Processing Instructions
- Resin Transfer Molding (RTM)
- Filament Winding
- Pressure Molding
- Pultrusion
- Wet Lay-up
Technical Details & Test Data
- Curing
Typical Curing Schedules
2 hours at 60°C + 4 - 8 hours at 120°C or 1 hour at 80°C + 2 - 8 hours at 140°C or 0.5 hours at 100°C + 2 - 8 hours at 160°C - Cured Properties
Neat Resin Properties
Property
Unit
Cure: 1 h 80°C + 8 h 140°C
Cure: 1 h 80°C + 4 h 160°C
Tg (DSC) °C 146 148 Tensile Strength kpsi 10.7 11.6 Tensile Elongation % 5 6.8 Tensile Modulus kpsi 377 362 Flexural Strength kpsi 17.7 — Flexural Modulus kpsi 374 — Flexural Elongation % 7.0 — Fracture Toughness K₁C √in·lbf/in² 652 ± 32 — Fracture Energy G₁C in·lbf/in² 0.94 ± 0.05 — Water Absorption
Condition
Unit
Cure: 1 h at 80°C + 8 h at 140°C
10 days H₂O at 23°C % 0.23 60 min H₂O at 100°C % 0.94 Coefficient Of Linear Thermal Expansion
Property Unit Value α (from 20 - 80°C) 10⁻⁶/K 40 Cure 1 h at 80°C + 8 h at 140°C
POISSON’S RATIO
Unit Value — 0.35 - Product Properties
Due to the excellent handling behavior the system is suitable for various production processes. It combines low viscosity with long pot life at elevated temperatures. The Cured system shows excellent mechanical, dynamic and thermal (hot/wet) properties and good chemical resistance
- Laminate Properties
Tensile / Flexural
Samples: E-glass fabric, 1200 tex, silane finish
Fiber volume content: 63 - 65%
Cure: 1 h 80°C + 8 h 140°CProperty Unit Value Cure Transverse Tensile Test kpsi 6.23 – 7.10 1 h at 80 °C + 8 h at 140 °C
Tensile Strength kpsi 6.53 – 7.01 Tensile Modulus kpsi 2280 – 2300 Tensile Elongation % 0.28 – 0.32 Transverse Compressive Test kpsi 15.5 – 20.3 Elastic Modulus kpsi 2245 – 2320 Torsion Test
Property Unit Value Shear Strength kpsi 8.5 – 9.3 Shear Modulus kpsi 720 – 870 Interlaminar Shear Strength (ILSS)
Short Beam: E-glass unidirectional specimen, thickness = 3.2 mm
Fiber Volume Content : 60%Property Unit Value Cure Shear Strength psi 8500 – 9100 1 h at 80 °C + 8 h at 140 °C
Safety & Health
- Handling Precautions
Danger ! Corrosive. Causes skin and eye burns. May cause allergic skin reaction.
- Avoid contact with eyes.
- Avoid contact with skin.
- Use with good ventilation.
First Aid
In case of contact :- Eyes : Promptly flush with large amounts of water. Get immediate
- medical attention.
- Skin : Promptly wash with mild soap and water.
- Inhalation : Remove to fresh air. Give oxygen if breathing is difficult.
- Ingestion : If conscious, give plenty of water. Get immediate medical attention.