Enhanced TDS
Identification & Functionality
- Function
- 1K (1 component) Adhesive
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features Information
- One-component, 100% solids, solvent-free
- High purity and very low outgassing (meet NASA requirements)
- Easily reworked
- Good hydrolytic stability
- Excellent thermal shock resistance provides improved reliability
- Good thermal conductivity
- Available in various packaging configurations
Applications & Uses
- Application Area
Properties
- Physical Form
Regulatory & Compliance
- Chemical Inventories
- OEM Standards
Technical Details & Test Data
- Processing Information
Processing Data:
- ARATHANE® 7760-1 Adhesive is frozen and packed in dry ice at the factory to minimize the possibility of exposure to high temperatures during shipment.
- Avoid handling dry ice or frozen syringes with bare hands.
- Remove syringe(s) from freezer storage and allow to thaw at room temperature (30°C/86°F maximum) only.
- Do not attempt to quick thaw by heating, as this will greatly reduce working life.
- Typical thawing time for syringes is 15 minutes at 25°C (77°F).
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Information
- ARATHANE® 7760-1 Adhesive is considered non-hazardous for shipping purposes. However, this product is packaged in special Styrofoam cartons containing enough dry ice for a limited storage life of approximately 48 to 96 hours during shipment.
- Upon receipt, frozen syringes must be transferred to freezer storage below -40°C to ensure product shelf life reliability.
- Special care should be taken when handling dry ice in order to avoid severe skin damage or potential of asphyxiation in unventilated areas.
- ARATHANE® 7760-1 Adhesive should be stored in a dry place, in the sealed original container, at temperatures below <-40°C (<-40°F). Under these storage conditions, the standard shelf life is 3 months (from date of shipment). The product should not be exposed to direct sunlight.
Other
- Appearance
- Off-white paste
- Color (SDS)
- Off-White
- Thermal Properties
Value Units Test Method / Conditions Thermal Conductivity 0.8 W/m·K W/m·K ISO 8894:1990 - Electrical Properties
Value Units Test Method / Conditions Dielectric Strength 630.0 V/mil V/mil IEC 60243 - Mechanical Properties
Value Units Test Method / Conditions Hardness 65.0-90.0 Shore A Shore A - Physical Properties
Value Units Test Method / Conditions Density 1.9-2.4 g/cm³ g/cm³ ASTM D792 Flash Point min. 93.0 °C °C ASTM D93 Glass Transition Temperature (Tg) -63.0 °C °C ISO 11359 Lap Shear Strength 200.0 psi psi ASTM D1002 at 25°C, Etched Aluminum Lap Shear Strength 130.0 psi psi ASTM D1002 at 25°C, Freon Degreased Nickel Plate Lap Shear Strength 230.0 psi psi ASTM D1002 at 25°C, Freon Degreased Polyimide Lap Shear Strength 220.0 psi psi ASTM D1002 at 25°C, Freon Degreased Solder Plate Lap Shear Strength 200.0 psi psi ASTM D1002 at 25°C, Scrubbed Nickel Plate Lap Shear Strength 130.0 psi psi ASTM D1002 at 93°C Ajax, etched aluminum Viscosity 240000.0-740000.0 cPs cPs ASTM D2393 at 25°C - Application Information
Value Units Test Method / Conditions Curing Time 1.0 hr hr at 100°C