Enhanced TDS
Identification & Functionality
- Blend
- No
- Chemical Family
- Composite Materials Functions
- Function
- Thermal Adhesive
- RTU Product Type
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features and Benefits
- One-component, 100% solids, solvent-free
- High purity and very low outgassing (meet NASA requirements)
- Easily reworked
- Good hydrolytic stability
- Excellent thermal shock resistance provides improved reliability
- Good thermal conductivity
- Available in various packaging configurations
Applications & Uses
- Adhesive & Sealant End Applications
- Application Area
- Markets
- Applications
Properties
- Physical Form
Regulatory & Compliance
Technical Details & Test Data
- Processing Data
ARATHANE® 7760 Adhesive is frozen and packed in dry ice at the factory to minimize the possibility of exposure to high temperatures during shipment. Avoid handling dry ice or frozen syringes with bare hands. Remove syringe(s) from freezer storage and allow to thaw at room temperature (30°C/86°F maximum) only. Do not attempt to quick thaw by heating, as this will greatly reduce working fife. Typical thawing time for syringes is 15 minutes at 25°C (77°F).
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Information
ARATHANE® 7760 Adhesive is considered non-hazardous for shipping purposes. However, this product is packaged in special Styrofoam cartons containing enough dry ice for a limited storage life of approximately 48 to 96 hours during shipment. Upon receipt, frozen syringes must be transferred to freezer storage below -40°C (<-40oF) to ensure product shelf life reliability. Special care should be taken when handling dry ice in order to avoid severe skin damage or potential of asphyxiation in unventilated areas. ARATHANE® 7760 Adhesive should be stored in a dry place, in the sealed original container, at temperatures below <-40°C (<-40oF). Under these storage conditions, the standard shelf life is 3 months (from date of shipment). The product should not be exposed to direct sunlight.
Other
- Appearance
- Off-white Paste
- Color (SDS)
- Off-white
- Odor (SDS)
- Aromatic
- Thermal Properties
Value Units Test Method / Conditions Thermal Conductivity 0.8 W/m·K W/m·K ISO 8894:1990 - Electrical Properties
Value Units Test Method / Conditions Dielectric Strength 630.0 V/mil V/mil IEC 60243 - Mechanical Properties
Value Units Test Method / Conditions Hardness 65.0-90.0 Shore A Shore A - Physical Properties
Value Units Test Method / Conditions Density 1.9-2.4 g/cm³ g/cm³ ASTM D792 Flash Point min. 93.0 °C °C ASTM D93 Glass Transition Temperature (Tg) -63.0 °C °C ISO 11359 Viscosity 240000.0-740000.0 cPs cPs ASTM D2393 at 25°C