Enhanced TDS
Identification & Functionality
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Product Features
- Product Features
- High density
- Non-flow edge filler
- 40 - 60 minute work life
- Room temperature cure
- Features Information
- High density
- Non-flow edge filler
- 40 - 60 minute work life
- Room temperature cure
Applications & Uses
- Markets
- Applications
- Mixing Ratio
Property Value Unit Condition Gel time min. 60 min at 25°C, 100 g Extrusion min. >90 g/min at 25°C, 80 psig Typical cure cycles 7 days - at 25°C , Gel at 25°C + 150 min at 93°C
Regulatory & Compliance
- OEM Specifications
Technical Details & Test Data
- Processing Guidelines
Parameter Value Work life, 50 g at 25°C, min 40 - 60 Typical cure cycle 24 hours at RT, or Gel at RT + 5 hours at 52°C
Packaging & Availability
Storage & Handling
- Storage Information
- EPOCAST® 1511 A/B epoxy syntactic should be stored in a dry place in the original sealed containers at temperatures between 2°C and 32°C (35.6°F and 89.6°F).
- After use, tightly reseal containers.
- Under these storage conditions, and when supplied under Huntsman standard certification, the product has a shelf life of 15 months (from date of manufacture).
- The product should not be exposed to direct sunlight.
- Storage Conditions
- EPOCAST® 1511 A/B epoxy syntactic should be stored in a dry place in the original sealed containers at temperatures between 2°C and 32°C (35.6°F and 89.6°F).
- After use, tightly reseal containers. Under these storage conditions, and when supplied under Huntsman standard certification, the product has a shelf life of 15 months (from date of manufacture).
- The product should not be exposed to direct sunlight.
Other
- Appearance
- Gray paste
- Color (Properties)
- Physical Form
- Product End Uses
- Application Information
Value Units Test Method / Conditions Mix Ratio 0.15 %(W) Hardener : Resin - Physical Properties
Value Units Test Method / Conditions Density 1.15 g/cm³ ASTM D1622 at 25°C