Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
Features & Benefits
- Ready-to-Use Product Features
- Features and Benefits
- Ultra Low Density Paste
- Flame Retardant
- Extrudable, Non Sag
Applications & Uses
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Markets
- Applications
- Mixing Ratio
- To 100 parts by weight of Epocast® 1628 A resin, add 25 parts by weight of Epocast® 1628 B hardener.
- Mix both components thoroughly for several minutes to insure complete and uniform mixing.
Properties
- Physical Form
- Notes
- 48 hours at 77°F (25°C), or gel at room temperature plus 5 hours at 125°F (52°C)
Regulatory & Compliance
- OEM Specifications
Technical Details & Test Data
- Mix Ratio Data
To 100 parts by weight of Epocast® 1628 A resin, add 25 parts by weight of Epocast® 1628 B hardener. Mix both components thoroughly for several minutes to insure complete and uniform mixing.
- Cured Properties
Property Value Unit Test Method Condition Compressive Strength 2,800 psi ASTM D695 at 25°C Compressive Strength 600 psi ASTM D695 at 82°C Compressive Strength 550 psi ASTM D695 at 121°C Compressive Modulus 230 ksi ASTM D695 at 25°C Tensile lap shear, Al-Al 800 psi ASTM D1002 at 25°C Flammability 0 seconds FAR 25.853 Extinguish Time, 60-second vertical Flammability 0.3 in FAR 25.853 Burn Length Weight gain 1.5 % ASTM D543 at 25°C,on immersion after 24 hours, Type III test fluid, Mil-S-3136
Weight gain 2.5 % ASTM D543 at 25°C,on immersion after 24 hours, hydraulic fluid, Mil-M-5606
Weight gain 3.5 % ASTM D543 at 25°C,on immersion after 24 hours, Skydrol 500-A
Weight gain 3.4 % ASTM D543 at 25°C,on immersion after 24 hours, Distilled water
Packaging & Availability
- Packaging Type
- Regional Availability
Storage & Handling
- Storage Conditions
- Epocast® 1628 A/B should be stored in a dry place, in the sealed original container, at temperatures between +2°C and +40°C (+35.6°F and 104°F).
- The product should not be exposed to direct sunlight. Under these storage conditions, and when supplied under Huntsman standard certification, this product has a shelf life of 6 months from date of shipment (expiration date may differ based on customer specification).
- Material temperatures should be above 18°C (65°F) when mixing. After use, tightly reseal containers.
- Storage Information
- Epocast® 1628 A/B should be stored in a dry place, in the sealed original container, at temperatures between +2°C and +40°C (+35.6°F and 104°F).
- The product should not be exposed to direct sunlight.
- Under these storage conditions, this product has a shelf life of 6 months from date of shipment (expiration date may differ based on customer specification).
- Material temperatures should be above 18°C (65°F) when mixing. After use, tightly reseal containers.
Other
- Appearance
- Pale yellow paste
- Physical Properties
Value Units Test Method / Conditions Density 0.5 g/cm³ g/cm³ ASTM D1622 at 25°C Gel Time 65.0 m m at 25°C, 60g