Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Advantages
- Non-yellowing
- High clarity after long-term exposure at temperatures up to 100°C
- Cures at a low temperature, permitting the use of polypropylene mold cups and extending mold cup life in discrete lamp production
- Long pot life
- Dies do not attack polycarbonate, allowing it to be used as a substrate
- Easy to de-air
- Product Advantages
- Non-yellowing
- High clarity after long-term exposure at temperatures up to 100°C (212°F)
- Cures at a low temperature, permitting the use of polypropylene mold cups and extending mold cup life in discrete lamp production
- Long pot life
- Dies do not attack polycarbonate, allowing it to be used as a substrate
- Easy to de-air
Applications & Uses
- Composites Processing Methods
- Product End Uses
Technical Details & Test Data
- Typical Electrical Properties
Typical Electrical Properties
Property Value Unit Test Method At Condition Dielectric constant 3.1 ASTM D-150 1 KHz Dissipation factor 0.025 ASTM D-150 1 KHz Volume resistivity 7.6 x 10¹⁵ Ω·cm ASTM D-257 at 25°C (77°F) Volume resistivity 8.0 x 10¹⁵ Ω·cm ASTM D-257 at 100°C (212°F)
- Typical Cured Properties
Typical Cured Properties
Property Value Unit Test Method At Condition Shrinkage 0.33 % ERF 12-69 Glass Transition Temperature 145 °C ASTM D-696, Thermomechanical Analysis
Coefficient of Thermal Expansion 66 ppm/°C ASTM D-696, Thermomechanical Analysis Alpha 1 CTE 170 ppm/°C ASTM D-696, Thermomechanical Analysis Alpha 2 Hardness 89 Shore D ASTM D-2240 - Typical Optical Properties
Typical Optical Properties
Property Test Value Index of Refraction, Mixed Wet 1.55
Safety & Health
- Safety Precautions
- First aid
- Keep out of reach of children
- For professional and industrial use only
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Information
- Epocast® 88103 A/B should be stored in a dry place and in the sealed original container, at temperatures between 18°C and 40°C (64°F and 104°F).
- Under these storage conditions the shelf life is 1 year.
- The product should not be exposed to direct sunlight.
- Storage Conditions
EPOCAST® 88103-A/B should be stored in a dry place and in the sealed original container, at temperatures between 18°C and 40°C (64°F and 104°F). Under these storage conditions the shelf life is 1 year. The product should not be exposed to direct sunlight.
Other
- Application Information
Value Units Test Method / Conditions Curing Time 3.0 h at 83°C, display Mix Ratio 0.35 %(W) Hardener : Resin - Physical Properties
Value Units Test Method / Conditions Gel Time 5.0 m at 121°C, 10g Viscosity 1050.0 cPs ASTM D2393 at 25°C, RVT spindle 2/20 rpm, Initial