Enhanced TDS
Identification & Functionality
- Chemical Family
- Function
- Catalyst
- Product Functions
- Technologies
- Product Families
Features & Benefits
- Product Features
- Features Information
Rapid Cures.
Applications & Uses
- Product End Uses
- Application Information
Consumer Patch Kits.
Regulatory & Compliance
Technical Details & Test Data
- Processing Information
GABEPRO™ GPM-830CB mercaptan-based epoxy hardener provides a gel time of approximately 30 minutes with a standard bisphenol-A epoxy resin mixed at a 1:1 ratio under ambient conditions.
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Information
- GABEPRO™ GPM-830CB curing agent should be stored in a dry place, in its sealed original container, at temperatures between 10°C - 30°C (50°F - 86°F).
- Under these storage conditions the shelf life is 24 months from date of manufacture.
- The product should not be exposed to direct sunlight. Mercaptans are known to yellow above 75°F.
- At 90°F the yellowing is accelerated and at 100°F the yellowing is instant.
- While yellowing is not always observed by the naked eye, a definite increase is detected by the colorimeter.
Other
- Appearance
- Colorless to slight yellow liquid
- Color (SDS)
- Colorless Light Yellow
- Material Compatibility
- Odor (SDS)
- Rotten-Egg Like
- Application Information
Value Units Test Method / Conditions Mix Ratio 100.0 phr with bis A epoxy resin - Physical Properties
Value Units Test Method / Conditions Flash Point min. 200.0 °F Gel Time 28.0-34.0 m at 25°C Specific Gravity 1.12 - at 25°C Viscosity 11000.0-15000.0 cPs Brookfield Viscometer at 25°C