IROGRAN® A 95 P 5044 H

IROGRAN® A 95 P 5044 H is a polyether-based Thermoplastic Polyurethane (TPU) for extrusion and injection molding applications. Key features are excellent hydrolysis and microbial resistance, excellent wear performance, good low temperature performance and high transparency.

 

The information, specifications, and materials provided with this product are for general informational purposes only and are subject to change without notice. The product is provided “as is” without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, or non-infringement. Users are responsible for ensuring the product is suitable for their intended application and for following all applicable safety guidelines and instructions.

The information, specifications, and materials accessible here may not reflect the most current version. Please use the Request a Document feature for the most current product documentation available.

Polymer Name: Thermoplastic Polyurethane (Polyether based)

Processing & Application Methods: Extrusion, Injection Molding

Product End Uses: Cable Jacketing, Films, Pneumatic Tube Applications, Sheets, Spiral Hoses

Density: 1150.0 kg/m³

Safety Data SheetTechnical Data Sheet
View All Documents

Enhanced TDS

Identification & Functionality

Blend
No
Chemical Family
Polyurethanes (PU),
Thermoplastic Polyurethanes (TPU)
Polymer Name
Thermoplastic Polyurethane (Polyether based)
Single Ingredient
Yes
Technologies
Elastomers
Product Families
Elastomers — Thermoplastic Elastomers
Thermoplastic Urethanes (TPU)

Features & Benefits

Product Features
Excellent Transparency Properties,
Good Wear Properties,
High Hydrolysis Resistance,
Low Temperature Applications,
Microbe Resistant

Applications & Uses

Product End Uses
Cable Jacketing,
Films,
Pneumatic Tube Applications,
Sheets,
Spiral Hoses
Markets
Electrical & Electronics,
Industrial
Applications
Electrical & Electronics — Wire & Cable
Jacketing & Insulation
Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Product Applications

Thick wall technical parts, pneumatic tubes, spiral hoses, cable jacketing and film and sheet.

Properties

Physical Form
Pellets

Regulatory & Compliance

Chemical Inventories
AIIC (Australia),
DSL (Canada),
ENCS (Japan),
IECSC (China),
KECI (Korea),
NZIoC (New Zealand),
PICCS (Phillipines),
TCSI (Taiwan),
TSCA (USA)

Technical Details & Test Data

Material Preparation

Irogran® A 95 P 5044 H is supplied pre-dried, however to ensure trouble-free processing it is preferable to dry before use. The recommended drying conditions are:

  • 3 hours at 100 - 110°C in circulating air
  • 3 hours at 80 - 90°C in dehumidified air
  • Dew point: -30°C

Safety & Health

Health and Safety Information

Before undertaking any trials with this product it is essential that all personnel are aware of the necessary precautions that must be taken.

Packaging & Availability

Packaging Type
Bags,
Drums,
Octabin
Regional Availability
  • Global
Packaging Information

Irogran® A 95 P 5044 H is supplied in bags, drums or octabins.

Storage & Handling

Shelf Life Information

Irogran® A 95 P 5044 H has a minimum expected shelf life of 12 months after shipment date.

Storage Condition

The product should be stored in a dry and cool place in the manufacturers original packaging.

Other

Appearance
Transparent pellets
Processing & Application Methods
Extrusion,
Injection Molding
Mechanical Properties
ValueUnitsTest Method / Conditions
Compression Set176.0%ASTM D395 at 70°C, 22 hours
Compression Set227.0%ASTM D395 at 23°C, 70h
Hardness95.0Shore AASTM D2240 after 3 seconds
Tear Strength3600.0PLIASTM D624
Tensile Strength49740.0psiASTM D412
Physical Properties
ValueUnitsTest Method / Conditions
Density11.15g/cm³ASTM D792
Glass Transition Temperature (Tg)2-33.0°CASTM D3418
Glass Transition Temperature (Tg)3-33.0°CDifferential Scanning Calorimetry