Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Composite Materials Functions
- Industrial Additives Functions
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Materials Features
- Features Information
- Non-corrosive
- Accelerator and catalyst for polyamides, polymercaptans, aliphatic polyamines, amidoamines and polyisocyanates
- Room and low temperature cure
- Low odor
- Light color
- Non-formaldehyde chemistry
Applications & Uses
- Applicable Processes
- Compatible Polymers & Resins
- Industrial Additives End Use
- Plastics & Elastomers End Uses
- Markets
- Applications
- Application Information
- Coatings
- Concrete patching compounds
- Adhesives
- Electrical potting and encapsulation
- Urethane foams
- Laminates and low color castings
Properties
- Physical Form
- Soluble In
Regulatory & Compliance
Technical Details & Test Data
- Processing Information
Processing Data :
Recommended mix ratio as a curing agent is 5 – 10 phr; as an accelerator is 1 – 5 phr. Due to chemical reaction, VERSAMID® EH-50 curing agent and epoxy resins should not be mixed until just prior to use.
Study Gel Time (200g mass), minutes :
Product Control (min) +5phr VERSAMID® EH-50 +5phr VERSAMID EH-30 VERSAMID® G151 81 66 56 VERSAMID® 140 108 84 66 VERSAMID® 115 178 125 144 VERSAMID® C30 38 25 30 Through Cure (6 mils DFT), hours :
Product Control +5phr VERSAMID® EH-50 +5phr VERSAMID EH-30 VERSAMID® G151 10 6 6 VERSAMID® 140 8 5 5 VERSAMID® 115 5 4 5 VERSAMID® C30 6 3 3 VERSAMID® 690 CE / VERSAMID® EH-50 Water Immersion Weight Gain, % :
Product Control +5phr VERSAMID® EH-50 +5phr VERSAMID EH-30 VERSAMID® G151 0.05 0.11 0.24 VERSAMID® 140 0.59 0.4 0.61 VERSAMID® 115 0.55 0.91 1.98 VERSAMID® C30 0.45 0.36 0.4
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Information
- VERSAMID® EH-50 curing agent should be stored in a dry place, in its sealed original container, at temperatures between 2°C to 40°C (35.6°F to 104°F).
- Under these storage conditions the shelf life is 12 months from date of manufacture.
- The product should not be exposed to direct sunlight.
Other
- Appearance (SDS)
- Liquid
- Color (SDS)
- Yellow
- Odor (SDS)
- Ammoniacal
- Chemical Properties
Value Units Test Method / Conditions Amine Value 465.0-510.0 mg KOH/g mg KOH/g - Physical Properties
Value Units Test Method / Conditions Density 8.0 lb/gal lb/gal Viscosity 150.0-400.0 cPs cPs Thermosel Viscosity Analyzer