Brands

JEFFAMINE® range offers the world’s most extensive selection of polyetheramines, many of which are unavailable elsewhere. These highly versatile products contain primary amino groups attached to the end of a polyether backbone normally based on propylene oxide (PO), ethylene oxide (EO), or a mixture of both oxides.

The ARALDITE® brand encompasses high-performance epoxy, acrylic, and polyurethane adhesives and high-performance specialty epoxy and benzoxazine resin systems. ARALDITE® adhesives cover a broad range of applications and offer both production and performance benefits to industrial, consumer and construction markets. ARALDITE® specialty thermoset resins are supplied in liquids or solids, and in a range of viscosities, functionalities and epoxy equivalent weights for a wide range of industrial applications, while ARALDITE® specialty epoxy resins are typically based on bisphenol-A, bisphenol-F, phenol novolacs, cresol novolacs, amino phenol, methylene dianiline, cycloaliphatics, and isocyanuric acid.

GABEPRO™ mercaptan-based epoxy curing agents are notable for their hardness development and rapid cure speed, along with an extensive range of properties. These mercaptan curing agents deliver an exceptional bond strength to glass, concrete, metal, and wood. In addition, they are ideal for many consumer adhesives, protective coatings and industrial products. They are frequently utilized to accelerate a variety of epoxy curing agents as well as amines, polyamides, and amidoamines.

Huntsman produces a variety of JEFFOL® polyether polyols which are essential to the development of flexible foam applications and polyurethane systems for energy-saving insulation.

MDI (methylene diphenyl diisocyanate) is one of the basic components used to make polyurethane foam. Polyurethane foam is made by reacting an isocyanate (MDI) with a polyol. Huntsman sells many differentiated grades of MDI in the Americas under the RUBINATE® name, and in Europe and Asia under the SUPRASEC® name.

MDI (methylene diphenyl diisocyanate) is one of the basic components used to make polyurethane foam. Polyurethane foam is made by reacting an isocyanate (MDI) with a polyol. Huntsman sells many differentiated grades of MDI in the Americas under the RUBINATE® name, and in Europe and Asia under the SUPRASEC® name.

The TEROL® family of polyester polyols are a critical component in the production of MDI-based polyurethane insulation systems – the most effective insulants available in the market, as measured by R-value. Insulation products based on TEROL® polyols include polyisocyanurate (PIR), boardstock systems (PUR), spray polyurethane foam (SPF) and pour-in-place applications, including entry doors, garage doors, coolers, refrigerators and commercial freezers.
A proprietary process enables the use of waste PET (polyethylene terephthalate) bottles, that may have been destined for landfills or found their way into oceans, in the production of TEROL® polyols. Both pre-consumer and post-consumer sources of PET are used.
Advantages of TEROL® polyols:

• PET content / renewable resource content
• Improved fire properties from high aromatic content
• High functionality for improved physical property performance and fast de-mold times
• Specifically formulated for use with a wide range of blowing agents