Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Properties
- Water proofing and good chemical resistance
- Solvent free, low viscosity, good flow and good penetration
- Strong bond with a wide variety of materials
- Low shrinkage
Applications & Uses
- Application Area
- Compatible Substrates & Surfaces
Properties
- Physical Form
Technical Details & Test Data
- Cured Properties
Typical Cured Properties
Property Value Unit Test Method Condition Compressive Strength ~80-90 N/mm² GB/T 2569 Cured 7 days (25°C)
Tensile Strength ~40-50 N/mm² GB/T 2568 Cured 7 days (25°C)
Flexural Strength ~70-80 N/mm² GB/T 2570 Cured 7 days (25°C)
Lap Shear Strength (St-St)* ~18 N/mm² GB/T 7124 Cured 7 days (25°C)
% Elongation ~2.5 % GB/T 2568 Cured 7 days (25°C)
* Lap shear strength = LSS, St = Steel
* Steel are pretreated with sand blasting- Processing Information
Pretreatment
- The strength and durability of a bonded joint is dependent on proper treatment of the surfaces to be bonded.
- Joint surfaces should be dried and cleaned in order to remove all traces of loose particles, oil, grease and dirt.
Application of Adhesives
Araldite® AY 133 and Hardener HY 133 should be thoroughly mixed together in the below mixing ratio.
Mix Ratio Parts by Weight Araldite® AY 133 100 Hardener HY 133 40 Minimum Curing Time* at 25°C About 2 days Full Cure Time ** at 25°C About 7 days *Reach 80% of full cure Lap Shear Strength (LSS, steel/steel)
**Reach ultimate Lap Shear Strength (LSS, steel/steel)Equipment maintenance
- All tools should be cleaned with hot water and soap before adhesives residues have had time to cure.
- The removal of cured residues is a difficult and time consuming operation.
- If solvents such as acetone are used for cleaning, operatives should take the appropriate precautions and, in addition, avoid skin and eye contact.
Storage & Handling
- Storage and Handling Precautions
Storage
- ARALDITE® AY 133 / Hardener HY 133 may be stored up to 2 year at 18 - 25°C provided the components are stored in sealed containers.
Handling Precautions
- Our products are generally quite harmless to handle provided that certain precautions normally taken when handling chemicals are observed.
- The uncured materials must not, for instance, be allowed to come into contact with foodstuffs or food utensils, and measures should be taken to prevent the uncured materials from coming in contact with the skin, since people with particularly sensitive skin may be affected.
- The wearing of impervious rubber or plastic gloves will normally be necessary; likewise the use of eye protection.
- The skin should be thoroughly cleansed at the end of each working period by washing with soap and warm water.
- The use of solvents is to be avoided. Disposable paper - not cloth towels - should be used to dry the skin.
- Adequate ventilation of the working area is recommended.
Other
- Appearance
- Pale yellow liquid
- Physical Properties
Value Units Test Method / Conditions Gel Time 60.0-80.0 m m at 25°C, 100g Viscosity 750.0 mPa.s mPa.s at 25°C