Brands

Huntsman accelerators are commonly used in combination with ARALDITE® epoxy resins, ARADUR® hardeners and JEFFAMINE® polyetheramines to accelerate the reaction rate of epoxy thermoset systems. Properly used accelerators can be an integral part of fine-tuning the reactivity of slower reacting resin formulations and can also serve to beneficially influence properties such as glass transition temperature (Tg), modulus, strength, elongation at break, and chemical resistance.

ARADUR® curing agents are supplied in liquid or solid form and can be used in conjunction with ARALDITE® epoxy resins to achieve a broad range of thermal, mechanical and electrical properties. This complete line of high-performance curing agents includes reactive polyamides, polyamido amines, aliphatic amines, cycloaliphatic amines, aromatic amines, anhydrides and novolacs.

ARA® Cool curing agents open new opportunities to formulate industrial coatings with very fast cure, even in cold conditions. The launch of the new ARA® Cool range enables Huntsman to meet demands for faster processing at low temperatures, as well as reduced VOC emissions. ARA® Cool products produce coatings with low blush, chemical resistance and excellent film aesthetics. These products can be formulated with a variety of Huntsman ARALDITE® resins.

GABEPRO™ mercaptan-based epoxy curing agents are notable for their hardness development and rapid cure speed, along with an extensive range of properties. These mercaptan curing agents deliver an exceptional bond strength to glass, concrete, metal, and wood. In addition, they are ideal for many consumer adhesives, protective coatings and industrial products. They are frequently utilized to accelerate a variety of epoxy curing agents as well as amines, polyamides, and amidoamines.

Huntsman’s large and growing family of unique JEFFCAT® catalysts brings strength, power, and speed to a wide range of urethane applications. The widespread use of these catalysts in making polyether and polyester foams, coatings, elastomers, and high-modulus urethane plastics attests to the value of our advanced technologies and our 50-plus years of experience with urethane chemicals.

NYCHEM® specialty nitrile latexes impart performance characteristics like flexibility, chemical and abrasion resistance, toughness, temperature tolerance into such niche applications as gaskets, paper coatings, textile coatings, adhesives, coal tar/asphalt sealants, masking tape, and abrasion paper.

OMICURE® curing agents, accelerators and catalysts are one-part epoxies which are important to many industries for lightweight, high-performance composites. These additives accelerate cure speed and lower cure temperature in one-part epoxy systems.

VERSACURE® epoxy curing agents provide formulators with a versatile array of properties when used in a two-part system with an epoxy resin. Epoxies cured with VERSACURE® curing agents are very tough, have very good adhesion to a variety of substrates and have excellent chemical resistance. Because of this unique combination of properties, VERSACURE® cured epoxy systems are used in several different industries, such as protective coatings, adhesives, composites, electrical insulation, and tooling.

VERSAMID® polyamide resins have proven to be superior curing agents in many applications, such as industrial maintenance and marine coatings, high-performance architectural paints, high-solids, and conventional coatings.