Enhanced TDS
Identification & Functionality
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Product Features
- Plastic Bonding Adhesive
- Long Work Life
- One to One Mix Ratio (PBW)
Applications & Uses
- Markets
- Applications
- Mixing Ratio
- To 100 parts by weight of Epibond® 1536-A resin, add 100 parts by weight of Epibond® 1536-B hardener.
- Mix both components thoroughly for several minutes.
Regulatory & Compliance
- Chemical Inventories
- OEM Specifications
Technical Details & Test Data
- Cured Properties
Cure Schedule
Three to five days at 25°C or gel at room temperature plus 20-30 minutes at 121°C.Property Key Value Unit Test Method Test Condition Tensile Lap Shear 3,000 psi ASTM D1002 at -55°C Tensile Lap Shear 3,000 psi ASTM D1002 at 25°C Tensile Lap Shear 550 psi ASTM D1002 at 83°C JP-4 Fuel Immersion 2,300 psi ASTM D543 after seven days at 25°C
TT-S-735 Type III Test Fluid 2,500 psi ASTM D543 after seven days at 25°C
Distilllled Water 1,600 psi ASTM D543 after seven days at 25°C
Safety & Health
- Storage Information
Keep out of reach of children
Packaging & Availability
- Packaging Type
- Regional Availability
Storage & Handling
- Storage Information
- EPIBOND® 1536-A/B should be stored in a dry place, in the sealed original container, at temperatures between +2°C and +40°C (+35.6°F and 104°F).
- The product should not be exposed to direct sunlight.
- Under these storage conditions, and when supplied under Huntsman standard certification, this product has a shelf life of 2 years (expiration date may differ based on customer specification).
- Material temperatures should be above 18°C (65°F) when mixing. After use, tightly reseal containers.
- Storage Conditions
- Epibond@ 1536-A/B should be stored in a dry place, in the sealed original container, at temperatures between +2C and +40°C. The product should not be exposed to direct sunlight. Under these storage conditions, and when supplied under Huntsman standard certification, this product has a shelf life of 2 years (expiration date may differ based on customer specification).
- Material temperatures should be above 18°C when mixing. After use, tightly reseal containers.
Other
- Material Compatibility
- Processing & Application Methods
- Application Information
Value Units Test Method / Conditions Mix Ratio 1.0 %(W) Hardener : Resin - Physical Properties
Value Units Test Method / Conditions Density 1.05 g/cm³ ASTM D792 Viscosity 2500.0 cPs ASTM D2196 at 25°C