Enhanced TDS
Identification & Functionality
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Features
- Fast Setting
- Convenient 1:1 Mix Ratio
- Paste Consistency
Applications & Uses
- Application Area
- Markets
- Applications
- Mixing Ratio
- If using bulk containers, to 100 parts by weight of Epibond® 8543 C resin, add 100 parts by weight of Epibond® 8543 B hardener or 1:1 parts by volume.
- Mix only that quantity which can be applied immediately after mixing. Due to the very fast setting properties of Epibond® 8543 C/B, hand mixing of the components should be avoided. Epibond® 8543 C/B is available in 50 mL twin cartridges.
- For best results, Epibond® 8543 C/B should be dispensed using manual or pneumatic dispensing equipment through a 0.25 in diameter, 20 element static mixing nozzle (Nordson EFD #7701488), or equivalent.
Properties
- Physical Form
- Mix Ratio
- If using bulk containers, to 100 parts by weight of EPIBOND® 8543 C resin, add 100 parts by weight of EPIBOND® 8543 B hardener or 1:1 parts by volume. Mix only that quantity which can be applied immediately after mixing. Due to the very fast setting properties of Epibond 8543 C/B, hand mixing of the components should be avoided.
- EPIBOND® 8543 C/B is available in 50 mL twin cartridges. For best results, EPIBOND® 8543 C/B should be dispensed using manual or pneumatic dispensing equipment through a 0.25 in diameter, 20 element static mixing nozzle (Nordson EFD #7701488), or equivalent.
Regulatory & Compliance
- OEM Specifications
Technical Details & Test Data
- Cured Properties
30-60 minutes at 77°F (25°C) or 1-2 hours at 45°F (7°C) or 1 hour at 70°C. May be cured at elevated temperatures to achieve optimum properties quickly.
Property Test Method Test Temperature Result Unit Tensile Lap Shear, Al-Al ASTM D1002 -55 °C 14.5 MPa Tensile Lap Shear, Al-Al ASTM D1002 25 °C 13.8 MPa Tensile Lap Shear, Al-Al ASTM D1002 83 °C 3.4 MPa
Packaging & Availability
- Packaging Type
- Regional Availability
Storage & Handling
- Storage Conditions
- EPIBOND® 8543-C / B should be stored in a dry place, in the sealed original container, at temperatures between +2°C and +40°C (+35.6°F and 104°F).
- The product should not be exposed to direct sunlight. Under these storage conditions, and when supplied under Huntsman standard certification, this product has a shelf life of 1 year from date of shipment (expiration date may differ based on customer specification).
- Material temperatures should be above 18°C (65°F) when mixing. After use, tightly reseal containers.
- Storage Informatin
- EPIBOND® 8543-C/B should be stored in a dry place, in the sealed original container, at temperatures between +2°C and +40°C (+35.6°F and 104°F).
- The product should not be exposed to direct sunlight.
Other
- Appearance
- Gray paste
- Physical Properties
Value Units Test Method / Conditions Density 1.25 g/cm³ g/cm³ ASTM D1875 at 25°C Gel Time 3.0 m m at 25°C, 20g