Products

AGOMET® F 305 A/B is a low-viscosity, two-component, room-temperature curing, "no mix" methacrylate adhesive suitable for bonding metals and plastics. The high cure rate of this product at room temperature allows it to cure bonded parts in a short time. The adhesive has an assembly time of 1 - 2 minutes, and after 5 minutes, the bonded parts are cured and will reach their final cured strength within 24 hours. Bonds made with AGOMET® F 305 A/B exhibit excellent tensile shear strength, peel strength, as well as excellent moisture and heat resistance.

AGOMET® F 330 / HARDENER Lacquer 2 is a "no-mix" room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Lacquer 2 show good tensile shear and peel strengths, as well as good temperature resistance.

AGOMET® F 330 / HARDENER Paste is a room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has a pot life of approximately 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Paste show good tensile shear and peel strengths, as well as good temperature resistance. The product can fill gaps of up to 5mm.

AGOMET® F 330 / HARDENER Powder with hardener powder or hardener paste is a room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has a pot life of approximately 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Powder show good tensile shear and peel strengths, as well as good temperature resistance. The product can fill gaps of up to 5mm.

ARALDITE® 2048-1 A/B is a two-component, room-temperature curing, flexible methacrylate adhesive. It is a fast-setting product, ideal for bonding and repair on metals, composites, and thermoplastics.

ARALDITE® AW 8621 / HARDENER HW 8621-3 is a two-part, black system specifically formulated for bonding plastics, including polycarbonate, ABS, nylon, and Telene®, as well as painted metals. It is also used for potting automotive light socket connectors. It features excellent environmental and impact resistance.

ARALDITE® AY 8683 / HARDENER HY 8683 is a two-component system formulated for filter-bonding applications. The polyurea elastomer has a quick set time and can be conveniently mixed by hand or via meter-mix equipment. It cures at room temperature.

ARALDITE® F 310 / HARDENER Lacquer 2 is a “No-mix” room temperature curing, methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with Araldite® F310 show good tensile shear and peel strengths as well as good thermal stability between -40°C and +130°C.

ARALDITE® LY 5052 / ARADUR® 5052 is a cold-curing epoxy system used in aerospace and industrial composites, tooling, and aircraft repair. ARALDITE® LY 5052 is a low-viscosity epoxy resin, and Aradur® 5052 is a mixture of polyamines.

EPIBOND® 1217-A/B epoxy adhesive is a two-part, translucent white paste that cures quickly at 77°F (25°C). It is recommended for bonding steel, aluminum, wood, ceramics, and a variety of polymeric substrates.

EPIBOND® 8543-C / B epoxy adhesive is an extremely fast-setting system for quick repair and bonding applications, even at colder temperatures. At 77°F (25°C), bonded parts may be handled in 10 minutes and will develop high strength within one hour. EPIBOND® 8543-C / B epoxy adhesive is supplied in contrasting colors. Complete mixing is indicated by a uniform gray color. This product is qualified to BMS 5-123, Type 1, Class 3.

EPOCAST® 1618-D / B epoxy syntactic is a low-density, flame-retardant compound for potting fasteners in honeycomb structures. The lightweight epoxy is easy to extrude through a 1/8 in (3 mm) nozzle orifice but is non-flowing after application. Epocast® 1618 D/B epoxy syntactic sets quickly at room temperature and is qualified to BMS 5-28, Type 18, Class 1. It is the suggested alternative for the discontinued Epocast® 1616 A/B epoxy syntactic, Epocast® 1618 A/B epoxy syntactic, and Epocast® 1620 A/B epoxy syntactic systems.

EPOCAST® 1626 C1 / D2 Epoxy Syntactic Foam is a fast-setting, two-component material designed for core filling, edge sealing, and bushing and fastener potting of honeycomb structures. The easy-handling viscous paste has low-flow characteristics. Epocast® 1626 C1/D2 epoxy syntactic foam is a toughened system that resists cracking and is especially suited for applications requiring high vibration and wide temperature cycling. This product has good retention of strength after environmental aging. EPOCAST® 1626 C1 / D2 epoxy syntactic foam is qualified to BMS 5-28, Type 26, and SMS 116201, Type 3.

EPOCAST® 1633-A/B epoxy syntactic is a halogen-free, flame-retardant paste designed for potting fasteners in honeycomb structures. EPOCAST® 1633-A/B epoxy syntactic sets quickly at room temperature.

EPOCAST® 1638-1 A/B epoxy syntactic adhesive is a low-density compound designed for potting fasteners in honeycomb structures. EPOCAST® 1638-1 A/B epoxy syntactic meets FAR 25.853 60-second vertical ignition requirements. EPOCAST® 1638-1 A/B is easily extruded through a 1/8 in (3 mm) nozzle orifice, but is non-flowing after application. EPOCAST® 1638-1 A/B epoxy syntactic adhesive sets quickly at room temperature. It does not contain halogenated fire retardant additives nor antimony trioxide.