Enhanced TDS
Identification & Functionality
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features and Benefits
- Quick Set Adhesive
- Room Temperature Cure
- One to One Mix Ratio
Applications & Uses
- Application Area
- Compatible Substrates & Surfaces
- Markets
- Applications
- Mixing Ratio
- To 100 parts by weight of EPIBOND® 1217-A/B, add 100 parts by weight of Epibond® 1217 B hardener or 1:1 by volume.
- Mix only that quantity which can be applied immediately after mixing. Due to the very fast setting properties of Epibond" 1217 A/B, hand mixing of the components should preferably be avoided. EPIBOND® 1217-A/B is available in 50 mL twin cartridges.
- For best results, EPIBOND® 1217-A/B should be dispensed using manual or pneumatic dispensing equipment through a 0.25 in diameter, 20 element static mixing nozzle (Nordson EFD #7701488), or equivalent.
Properties
- Physical Form
Regulatory & Compliance
Technical Details & Test Data
- Mix Ratio Data
- To 100 parts by weight of Epibond® 1217 A resin, add 100 parts by weight of Epibond® 1217 B hardener or 1:1 by volume.
- Mix only that quantity which can be applied immediately after mixing. Due to the very fast setting properties of Epibond® 1217 A/B, hand mixing of the components should preferably be avoided.
- Epibond® 1217 A/B is available in 50 mL twin cartridges. For best results, Epibond® 1217 A/B should be dispensed using manual or pneumatic dispensing equipment through a 0.25 in diameter, 20 element static mixing nozzle (Nordson EFD #7701488), or equivalent.
- Cured Properties
Cure Schedule
One to two hours at 25°CTest Results Units Test Method Conditions Tensile Lap Shear 1350 psi ASTM D1002 at -55°C, Al-Al Tensile Lap Shear 2500 psi ASTM D1002 at 25°C, Al-Al Tensile Lap Shear 500 psi ASTM D1002 at 83°C, Al-Al
Packaging & Availability
- Packaging Type
- Regional Availability
Storage & Handling
- Storage Conditions
- EPIBOND® 1217-A/B should be stored in a dry place, in the sealed original container, at temperatures between +2°C and +40°C (+35.6°F and 104°F).
- The product should not be exposed to direct sunlight. Under these storage conditions, and when supplied under Huntsman standard certification, this product has a shelf life of 1 year from date of shipment (expiration date may differ based on customer specification).
- Material temperatures should be above 18°C (65°F) when mixing. After use, tightly reseal containers.
- Storage Information
- EPIBOND® 1217-A/B should be stored in a dry place, in the sealed original container, at temperatures between +2°C and +40°C (+35.6°F and 104°F).
- The product should not be exposed to direct sunlight.
- Under these storage conditions, and when supplied under Huntsman standard certification, this product has a shelf life of 1 year from date of shipment (expiration date may differ based on customer specification).
- Material temperatures should be above 18°C (65°F) when mixing. After use, tightly reseal containers.
Other
- Physical Properties
Value Units Test Method / Conditions Density 1.19 g/cm³ g/cm³ ASTM D792 Gel Time 4.0-8.0 m m ASTM D2471 at 25°C, 50g