Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
Features & Benefits
- Product Features
- Key Features
- 100% Solids
- High Peel Strength
Applications & Uses
- Cure Method
- Markets
- Applications
- Processing Information
Mix ratio: To 100 parts by weight of Uralane® 5776 A resin, add 40 parts by weight of Uralane® 5776 B hardener. Mix both components thoroughly for several minutes to insure complete and uniform mixing.
Cure schedules:
- 5 - 7 days at 77°F (25°C) ± 2°F
- 2 hours at room temperature plus 4 hours at 150°F (66°C)
- 2 hours at room temperature plus 1-1/2 hours at 200°F (93°C)
Typical cured properties:
Test
Test Method
Result
Tensile lap shear, psi (MPa) at -67°F (-55°C), Al-Al ASTM D1002 3500 (24.1) Tensile lap shear, psi (MPa) at 77°F (25°C), Al-Al ASTM D1002 2300 (15.9) Tensile lap shear, psi (MPa) at 180°F (83°C), Al-Al ASTM D1002 550 (3.8) Tensile lap shear, psi (MPa) after 7 days immersion in water at 77°F (25°C), Al-Al ASTM D1002 800 (5.5) Tensile lap shear, psi (MPa) Ultem-Ultem® (Polyetherimide), Al-Al ASTM D1002 640 (4.4) T-peel, Al-Al pli (N/mm) at 77°F (25°C) ASTM D1876 28 (4.9) T-peel, Al-Al pli (N/mm) at 77°F (25°C), after 7 days immersion in water ASTM D1876 34 (5.9) Durometer hardness, Shore A ASTM D2240 70 Tensile strength, psi (MPa) ASTM D412 1000 (6.9) Elongation, % ASTM D412 700 Tear Strength, ppi (N/mm) ASTM D624 250 (43.7)
Properties
- Physical Form
- Mix Ratio Data
- To 100 parts by weight of Uralane® 5776 A resin, add 40 parts by weight of Uralane® 5776 B hardener.
- Mix both components thoroughly for several minutes to insure complete and uniform mixing.
Regulatory & Compliance
- Chemical Inventories
Packaging & Availability
- Packaging Type
- Regional Availability
Storage & Handling
- Storage Information
- Uralane® 5776 A/B should be stored in a dry place, in the sealed original container, at temperatures between +2°C and +40°C (+35.6°F and 104°F).
- These products should not be exposed to direct sunlight.
- Under these storage conditions, and when supplied under Huntsman standard certification, these products have a shelf life of 6 months from date of shipment (expiration date may differ based on customer specification).
- These products are moisture sensitive and are packaged under a blanket of dry nitrogen. Material temperatures should be above 18°C (65°F) when mixing.
- After opening a container, re-blanket with dry nitrogen and then tightly reseal.
- Storage Conditions
URALANE® 5776-A/B should be stored in a dry place, in the sealed original container, at temperatures between +2°C and +40°C (+35.6°F and 104°F). These products should not be exposed to direct sunlight. Under these storage conditions, and when supplied under Huntsman standard certification, these products have a shelf life of 6 months from date of shipment (expiration date may differ based on customer specification). These products are moisture sensitive and are packaged under a blanket of dry nitrogen. Material temperatures should be above 18°C (65°F) when mixing. After opening a container, re-blanket with dry nitrogen and then tightly reseal.
Other
- Appearance
- Olive tan
- Material Compatibility
- Application Information
Value Units Test Method / Conditions Mix Ratio 0.4 %(W) Hardener : Resin - Physical Properties
Value Units Test Method / Conditions Density 1.1 g/cm³ ASTM D792 Gel Time 35.0-45.0 m ASTM D2471 at 25°C, 100g