Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Application Area
- Compatible Substrates & Surfaces
- Markets
- Applications
- Mixing Ratio
To 100 parts by weight of Epibond® 104A-1 Resin add 10 parts by weight of Epibond® 104-B Hardener. Mix both components thoroughly for several minutes to insure complete and uniform mixing.
Properties
- Physical Form
Regulatory & Compliance
Technical Details & Test Data
- Typical Cured Properties
Cure Schedule : Three days at 77ºF (25°C), or 24 hours at 100ºF (38°C), or one hour at 150ºF (66°C)
Test
Results
Test Method
Tensile lap shear, AL/AL, 77ºF (25°C), psi (MPa)
2200 (15.2)
ASTM-D-1002
- Technical Information
Mix Ratio
- To 100 parts by weight of Epibond® 104A-1 Resin add 10 parts by weight of Epibond® 104-B Hardener.
- Mix both components thoroughly for several minutes to insure complete and uniform mixing.
Cure Schedule
- Three days at 77°F (25°C), or 24 hours at 100°F (38°C), or one hour at 150°F (66°C).
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Information
- EPIBOND® 104A-1/B should be stored in a dry place, in the sealed original container, at temperatures between +2°C and +40°C (+35.6°F and 104°F).
- The product should not be exposed to direct sunlight.
- Under these storage conditions, and when supplied under Huntsman standard certification, this product has a shelf life of 1 year (expiration date may differ based on customer specification).
- Material temperatures should be above 18°C (65°F) when mixing. After use, tightly reseal containers.
- Storage Conditions
Epibond® 104A-1/B should be stored in a dry place, in the sealed original container, at temperatures between +2°C and +40°C (+35.6°F and 104°F). The product should not be exposed to direct sunlight. Under these storage conditions, and when supplied under Huntsman standard certification, this product has a shelf life of 1 year (expiration date may differ based on customer specification).
Material temperatures should be above 18°C (65°F) when mixing. After use, tightly reseal containers.
Other
- Application Information
Value Units Test Method / Conditions Mix Ratio 0.1 - Hardener : Resin - Physical Properties
Value Units Test Method / Conditions Density 1.12 g/cm³ g/cm³ ASTM D792 Gel Time 30.0-50.0 - ASTM D2471 at 25°C