Enhanced TDS
Identification & Functionality
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Features
- General purpose adhesive
- Room temperature cure
- Variable properties
Applications & Uses
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Markets
- Applications
- Processing Information
Mix Ratio
Product
Parts by weight
EPIBOND® 1210 A-1 Resin
100
EPIBOND® 1210 B Hardener
65
Material temperatures should be above 65°F (18°C) when mixing. Mix both components thoroughly for several minutes to insure complete and uniform mixing. Up to 100 parts by weight of Epibond® 1210 B hardener may be used for more flexible bonds.
Processing Data
Parameter
Value
Work life, 100 g at 25℃, min
50 - 75
Typical cure cycles
48 hours at 23 - 26C, or
2 hours at 66C- Application Information
- General purpose adhesive
- Room temperature cure
- Variable properties
Properties
- Physical Form
Regulatory & Compliance
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Conditions
EPIBOND® 1210 A-1/B should be stored in a dry place in the original sealed containers at temperatures between 2°C and 40°C (36°F and 104°F). After use, tightly reseal containers. Under these storage conditions, and when supplied under Huntsman standard certification, the product has a shelf life of 1 year from date of shipment. The product should not be exposed to direct sunlight.
- Storage Information
- EPIBOND® 1210 A-1/B should be stored in a dry place in the original sealed containers at temperatures between 2°C and 40°C (36°F and 104°F).
- After use, tightly reseal containers. Under these storage conditions, and when supplied under Huntsman standard certification, the product has a shelf life of 1 year from date of shipment.
- The product should not be exposed to direct sunlight.
Other
- Physical Properties
Value Units Test Method / Conditions Density 1.3 g/cm³ g/cm³ ASTM D792