Enhanced TDS
Identification & Functionality
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features Information
Good properties in the presence of distilled water, salt water, JP-4, hydraulic fluids.
- Features and Benefits
- Long Work Life
- High Strength
- Qualified to BMS 5-126
Applications & Uses
- Compatible Substrates & Surfaces
- Markets
- Applications
- Mixing Ratio
- To 100 parts by weight of EPIBOND® 1534 A/B, add 100 parts by weight of Epibond 1534 B hardener.
- Mix both components thoroughly for several minutes.
Regulatory & Compliance
Technical Details & Test Data
- Mix Ratio Data
To 100 parts by weight of Epibond® 1534 A resin, add 100 parts by weight of Epibond® 1534 B hardener. Mix both components thoroughly for several minutes.
- Cured Properties
Three days at 25°C, or gel at room temperature plus 20-30 minutes at 121°C.
Propety Key
Results
Units
Test Method
Conditions
Tensile Lap Shear 3,150 psi ASTM D1002 at -55°C Tensile Lap Shear 3,000 psi ASTM D1002 at 25°C Tensile Lap Shear 575 psi ASTM D1002 at 83°C JP-4 Fuel Immersion 2,300 psi ASTM D543 after seven days at 25°C
TT-S-735 Type III Test Fluid 2,500 psi ASTM D543 after seven days at 25°C
Distilllled Water 1,600 psi ASTM D543 after seven days at 25°C
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Conditions
- EPIBOND® 1534 A/B should be stored in a dry place, in the sealed original container, at temperatures between +2°C and +40°C (+35.6°F and 104°F).
- The product should not be exposed to direct sunlight. Under these storage conditions, and when supplied under Huntsman standard certification, this product has a shelf life of 2 years from date of shipment (expiration date may differ based on customer specification).
- Material temperatures should be above 18°C (65°F) when mixing. After use, tightly reseal containers.
- Storage Information
- EPIBOND® 1534-A/B should be stored in a dry place, in the sealed original container, at temperatures between +2°C and +40°C (+35.6°F and 104°F).
- The product should not be exposed to direct sunlight.
- Under these storage conditions, and when supplied under Huntsman standard certification, this product has a shelf life of 2 years from date of shipment (expiration date may differ based on customer specification).
Other
- Physical Properties
Value Units Test Method / Conditions Density 1.05 g/cm³ g/cm³ ASTM D792 Viscosity 2000.0 cPs cPs ASTM D2196 at 25°C