Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features and Benefits
- Flame retardant
- Gap Filling Properties
- Early Green Strength
- Beige
Applications & Uses
- Application Area
- Compatible Substrates & Surfaces
- Markets
- Applications
- Mixing Ratio
- To 100 parts by weight of Epibond® 1544-1 A-82 resin, add 13 parts by weight of Epibond® 1544 D hardener (same mix ratio applies to all color variations).
- Mix both components thoroughly for several minutes to assure complete mixing.
- Avoid air entrapment during mixing.
Properties
- Physical Form
Regulatory & Compliance
- OEM Specifications
- Quality Standards
Technical Details & Test Data
- Cured Properties
Cure Schedule
Twenty-four hours at 77°F (25°C), or gel at 77°F (25°C) plus one hour at 150°F (66°C).Property Value Unit Test Method Condition Tensile Lap Shear Strength 2,400 psi ASTM D1002 Al/Al, after 24 hours at 25°C
Tensile Lap Shear Strength 3,050 psi ASTM D1002 Al/Al, after 20 minutes at 121°C
Tensile Lap Shear Strength 2,400 psi ASTM D1002 Al/Al, after 7 days immersion in Jet-A
Tensile Lap Shear Strength 1,870 psi ASTM D1002 Al/Al, after 7 days immersion in water
Tensile Lap Shear Strength 2,600 psi ASTM D1002 Al/Al, after 7 days immersion in Mil-S-3136 Type III fluid
Flammability (with glass cloth)
Property Value Unit Condition Self-extinguishing time max. 1 second 60-second ignition, vertical
Burn length 3 inch 60-second ignition, vertical
Drip extinguishing time No drip 60-second ignition, vertical
Packaging & Availability
- Packaging Type
- Regional Availability
Storage & Handling
- Storage Information
- EPIBOND® 1544-1 A-82/D Adhesive should be stored in a dry place, in the sealed original container, at temperatures between +2°C and +40°C (+36 °F and 104°F). The product should not be exposed to direct sunlight. Under these storage conditions, and when supplied under Huntsman standard certification, this adhesive has a shelf life of 2 years (expiration date may differ based on customer specification). The temperature of both components should be above 18°C (65°F) prior to mixing. After use, tightly reseal containers.
- Storage Conditions
- EPIBOND® 1544-1 A-82/D Adhesive should be stored in a dry place, in the sealed original container, at temperatures between +2°C and +40°C.
- The product should not be exposed to direct sunlight. Under these storage conditions, and when supplied under Huntsman standard certification, this adhesive has a shelf life of 2 years (expiration date may differ based on customer specification).
- The temperature of both components should be above 18°C prior to mixing. After use, tightly reseal containers.
Other
- Application Information
Value Units Test Method / Conditions Mix Ratio 0.13 - Hardener : Resin - Physical Properties
Value Units Test Method / Conditions Density 1.25 g/cm³ g/cm³ ASTM D792 Gel Time 70.0 - ASTM D2471 at 25°C, 100g