Brands

Huntsman’s large and growing family of unique JEFFCAT® catalysts brings strength, power, and speed to a wide range of urethane applications. The widespread use of these catalysts in making polyether and polyester foams, coatings, elastomers, and high-modulus urethane plastics attests to the value of our advanced technologies and our 50-plus years of experience with urethane chemicals.

JEFFOX® products are water-soluble, have relatively high flash points and exhibit excellent compatibility with numerous additives such as antioxidants and corrosion inhibitors, making them particularly useful in the removal and reflow of solder in printed circuit boards, where proprietary oxidation inhibitor packages reduce the rate of degradation at the high temperatures required. Other applications include lubricants, plasticizers, solvents, coupling agents, frothing and defrothing agents, inks, dyes and chemical intermediates.

JEFFSOL® Carbonates act as solvents for many organic and inorganic materials in applications such as surface cleaners, degreasers, dyes, fibers, plastics, batteries, aromatic hydrocarbons and natural gas.

NYCHEM® specialty nitrile latexes impart performance characteristics like flexibility, chemical and abrasion resistance, toughness, temperature tolerance into such niche applications as gaskets, paper coatings, textile coatings, adhesives, coal tar/asphalt sealants, masking tape, and abrasion paper.

OMICURE® curing agents, accelerators and catalysts are one-part epoxies which are important to many industries for lightweight, high-performance composites. These additives accelerate cure speed and lower cure temperature in one-part epoxy systems.

PHENOXY™ resins serve as performance-enhancing additives for epoxy systems and in select thermoplastic applications. They promote adhesion and improve performance in coatings for difficult-to-adhere-to substrates, such as glass and polished metals. They serve as a strengthening enhancer in carbon fiber composites, as well as promote flexibility and boost chemical resistance in industrial and transportation applications.

MDI (methylene diphenyl diisocyanate) is one of the basic components used to make polyurethane foam. Polyurethane foam is made by reacting an isocyanate (MDI) with a polyol. Huntsman sells many differentiated grades of MDI in the Americas under the RUBINATE® name, and in Europe and Asia under the SUPRASEC® name.

MDI (methylene diphenyl diisocyanate) is one of the basic components used to make polyurethane foam. Polyurethane foam is made by reacting an isocyanate (MDI) with a polyol. Huntsman sells many differentiated grades of MDI in the Americas under the RUBINATE® name, and in Europe and Asia under the SUPRASEC® name.

VERSACURE® epoxy curing agents provide formulators with a versatile array of properties when used in a two-part system with an epoxy resin. Epoxies cured with VERSACURE® curing agents are very tough, have very good adhesion to a variety of substrates and have excellent chemical resistance. Because of this unique combination of properties, VERSACURE® cured epoxy systems are used in several different industries, such as protective coatings, adhesives, composites, electrical insulation, and tooling.

VERSAMID® polyamide resins have proven to be superior curing agents in many applications, such as industrial maintenance and marine coatings, high-performance architectural paints, high-solids, and conventional coatings.