Products

AGOMET® F 305 A/B is a low-viscosity, two-component, room-temperature curing, "no mix" methacrylate adhesive suitable for bonding metals and plastics. The high cure rate of this product at room temperature allows it to cure bonded parts in a short time. The adhesive has an assembly time of 1 - 2 minutes, and after 5 minutes, the bonded parts are cured and will reach their final cured strength within 24 hours. Bonds made with AGOMET® F 305 A/B exhibit excellent tensile shear strength, peel strength, as well as excellent moisture and heat resistance.

ARALDITE® 2012 A/B is a rapid cure, multipurpose, two-component, room temperature curing, high-viscosity liquid adhesive with high strength and toughness. It is suitable for bonding a wide variety of metals, ceramics, glass, rubbers, rigid plastics, and most other materials in common use. It is a versatile adhesive for craftsmen as well as most industrial applications.

ARALDITE® 2018 A/B is a two-component, room temperature curing, pale-colored, lightly thixotropic liquid polyurethane adhesive for thermoplastic bonding.

ARALDITE® 2051 A/B is a fast curing, two-part methacrylate adhesive designed to accelerate structural bonding operations while providing high toughness and resilience to vibrations, impact, and dynamic loading.

ARALDITE® 8680 / HARDENER 5868 is a two-part, black system specifically formulated for bonding plastics, including polycarbonate, ABS, nylon, and Telene®, as well as painted metals. It features excellent environmental stability and impact resistance.

ARALDITE® AV 4076-1 / HARDENER HY 4076 is a two-component, room-temperature curing paste adhesive that gives a resilient bond. It is thixotropic and non-sagging up to a 10mm thickness. It is suitable for bonding SMC, polycarbonate, ABS, and metals. It meets the requirements of the Water Regulations Advisory Scheme (WRAS) tests on the effect on water quality (BS6920:2000) for cold water use when cured for 14 days at 23°C.

ARALDITE® AV 4415 / HARDENER HV 4416-1 is a two-component, ambient temperature gelling paste adhesive. After post-curing at temperatures up to 150°C, it will provide bonds with temperature resistance up to 180°C and excellent resistance to common chemicals. It is suitable for bonding a range of ferrous metals, aluminum alloy substrates, and polymeric substances such as GRE, GRP, ABS, and SMC.

ARALDITE® AV 4738 / HARDENER HV 4739 is a two-component, ambient temperature curing paste adhesive. After post-curing either at application or in service, it will provide bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS, and SMC.

ARALDITE® AW 4510 / HARDENER HW 4511-1 is a two-component, ambient temperature gelling paste adhesive, which after post-curing at temperatures up to 150°C, will provide bonds with temperature resistance up to 180°C and excellent resistance to common chemicals. It is suitable for bonding a range of ferrous metals, aluminium alloy substrates, and polymeric substances such as GRE, GRP, ABS, and SMC.

ARALDITE® AW 8621 / HARDENER HW 8621-3 is a two-part, black system specifically formulated for bonding plastics, including polycarbonate, ABS, nylon, and Telene®, as well as painted metals. It is also used for potting automotive light socket connectors. It features excellent environmental and impact resistance.

ARALDITE® AW 8680 / HARDENER HW 5542 is a two-part, rapid-curing system specifically formulated for bonding plastics, including polycarbonate, ABS, nylon, and Metton® with minimal substrate preparation. ARALDITE® AW 8680 / HARDENER HW 5542 has also been used successfully for bonding materials with differing CTEs, such as nylon to stainless steel. Once cured, it features good environmental stability and impact resistance.

ARALDITE® CY 8763 / ARADUR® HY 8763 is a high-performance, two-component epoxy system designed for sealed lead acid storage batteries. This system offers excellent sulfuric acid resistance and superior adhesion properties.

RENPIM® 5215 Isocyanat / RENPIM® 5215 Polyol is a Parts In Minutes© polyurethane that simulates the appearance and physical characteristics of engineering thermoplastics for prototyping and short production runs. They can be used to produce functional prototype parts suitable for use in all major industrial areas including automotive, aerospace, consumer goods, electronic, and leisure applications. RenPIM© 5215 Isocyanate / Polyol is a black system with high-temperature resistance. It is specially formulated for “under the hood” type applications within the automotive industry.