Products

AGOMET® F 305 A/B is a low-viscosity, two-component, room-temperature curing, "no mix" methacrylate adhesive suitable for bonding metals and plastics. The high cure rate of this product at room temperature allows it to cure bonded parts in a short time. The adhesive has an assembly time of 1 - 2 minutes, and after 5 minutes, the bonded parts are cured and will reach their final cured strength within 24 hours. Bonds made with AGOMET® F 305 A/B exhibit excellent tensile shear strength, peel strength, as well as excellent moisture and heat resistance.

ARALDITE® 2012 A/B is a rapid cure, multipurpose, two-component, room temperature curing, high-viscosity liquid adhesive with high strength and toughness. It is suitable for bonding a wide variety of metals, ceramics, glass, rubbers, rigid plastics, and most other materials in common use. It is a versatile adhesive for craftsmen as well as most industrial applications.

ARALDITE® 2014 A/B is a two-component, room temperature curing, thixotropic paste adhesive with high strength and excellent chemical resistance. It is used for bonding metals, electronic components, GRP structures, and many other items exposed to higher than normal temperatures or more aggressive environments. Its low outgassing makes it suitable for specialist electronic telecommunications and aerospace applications.

ARALDITE® 2018 A/B is a two-component, room temperature curing, pale-colored, lightly thixotropic liquid polyurethane adhesive for thermoplastic bonding.

ARALDITE® 2021-1 A/B is a two-component, room temperature curing, methacrylate-based, general-purpose adhesive for rapid assembly operations with a wide variety of substrates.

ARALDITE® 2022-1 A/B is a two-component, room temperature curing, methacrylate adhesive for fast assembly operations on a wide range of substrates, including those which can be “difficult to bond.”

ARALDITE® 2026 A/B is a two-component, room-temperature-curing, clear transparent polyurethane adhesive. It is designed for bonding selected thermoplastics (e.g., polycarbonate), thermoset composites, and for bonding plastics to metals and glass.

ARALDITE® 2028-1 A/B is a two-component, transparent, cold-curing polyurethane adhesive with a flash point above 100 °C. ARALDITE® 2028-1 adhesive is fast curing and UV stable. It is suitable for bonding a variety of metal and plastic substrates.

ARALDITE® 2051 A/B is a fast curing, two-part methacrylate adhesive designed to accelerate structural bonding operations while providing high toughness and resilience to vibrations, impact, and dynamic loading.

ARALDITE® 8680 / HARDENER 5868 is a two-part, black system specifically formulated for bonding plastics, including polycarbonate, ABS, nylon, and Telene®, as well as painted metals. It features excellent environmental stability and impact resistance.

ARALDITE® AV 4076-1 / HARDENER HY 4076 is a two-component, room-temperature curing paste adhesive that gives a resilient bond. It is thixotropic and non-sagging up to a 10mm thickness. It is suitable for bonding SMC, polycarbonate, ABS, and metals. It meets the requirements of the Water Regulations Advisory Scheme (WRAS) tests on the effect on water quality (BS6920:2000) for cold water use when cured for 14 days at 23°C.

ARALDITE® AW 8621 / HARDENER HW 8621-3 is a two-part, black system specifically formulated for bonding plastics, including polycarbonate, ABS, nylon, and Telene®, as well as painted metals. It is also used for potting automotive light socket connectors. It features excellent environmental and impact resistance.

ARALDITE® AW 8680 / HARDENER HW 5542 is a two-part, rapid-curing system specifically formulated for bonding plastics, including polycarbonate, ABS, nylon, and Metton® with minimal substrate preparation. ARALDITE® AW 8680 / HARDENER HW 5542 has also been used successfully for bonding materials with differing CTEs, such as nylon to stainless steel. Once cured, it features good environmental stability and impact resistance.