Enhanced TDS
Identification & Functionality
Features & Benefits
- Product Features
- Features and Benefits
- Structural Applications
- Room Temperature Cure Paste
- Extremely Tough and Resilient
- Product Features
- Structural Applications
- Room Temperature Cure Paste
- Extremely Tough and Resilient
Applications & Uses
- Markets
- Applications
- Processing Information
Mix Ratio
Products
Product Parts by weight
Epibond® 420 A Resin 100 Epibond® 420 B Hardener 40 Material temperatures should be above 18°C (65°F) when mixing. Mix the resin and hardener at the above ratio thoroughly for 2-3 minutes to achieve a uniform color. Epibond® 420 A/B is available in a 50 mL twin cartridge, and for best results should be dispensed using manual or pneumatic dispensing equipment through a suitable mixing nozzle as shown below:
Static Mixing NozzlesWidth/Diameter (in)
Number of Elements
Nordson EFD Part #
Sulzer Mixpac Part #
0.20 20 7701830 N/A 0.21 21 7701453 MAH 05-21T
For other mixing and application recommendations, please consult your local Huntsman Advanced Materials representative or one of our distributors.
Parameter Value Gel time at 77°F, min 70 Typical Cure Cycles 7 days at 77°F or 90 min at 175°F or Gel at RT + 2 hours at 140°F or 1 hour at 250°F Material temperatures should be above 18°C (65°F) when mixing. Mix the resin and hardener at the above ratio thoroughly for 2-3 minutes to achieve a uniform color. Epibond® 420 A/B is available in a 50 mL twin cartridge, and for best results should be dispensed using manual or pneumatic dispensing equipment through a suitable mixing nozzle as shown below:
Width/Diameter (in)
Number of Elements
Nordson EFD Part #
Sulzer Mixpac Part #
0.20 20 7701830 N/A 0.21 21 7701453 MAH 05-21T
For other mixing and application recommendations, please consult your local Huntsman Advanced Materials representative or one of our distributors.
Parameter Value Gel Time at 77°F, min 70 Typical Cure Cycles 7 days at 77°F or 90 min at 175°F or Gel at RT + 2 hours at 140°F or 1 hour at 250°F
Regulatory & Compliance
Technical Details & Test Data
- Processing Condition
Material temperatures should be above 18°C (65°F) when mixing. Mix the resin and hardener at the above ratio thoroughly for 2-3 minutes to achieve a uniform color. EPIBOND® 420 A/B is available in a 50 mL twin cartridge, and for best results should be dispensed using manual or pneumatic dispensing equipment through a suitable mixing nozzle as shown below:
Static Mixing Nozzles
Width/Diameter, in Number of Elements Nordson EFD Part # Sulzer Mixpac Part #
0.20 20 7701830 N/A 0.21 21 7701453 MAH 05-21T - Cured Properties
Unless otherwise stated, the data were determined with typical production batches using standard test methods. They are typical values only, and do not constitute a product specification. Samples were cured for one hour at 250°F. Testing was performed at 77°F (25°C) unless otherwise stated.
Property Key
Value
Unit
Test Method
Condition
Tensile Lap Shear Strength 4,500 psi ASTM D1002 at 25°C, Al-Al Tensile Lap Shear Strength 500 psi ASTM D1002 at 82°C, Al-Al Tensile Lap Shear Strength 300 psi ASTM D1002 at 82°C, Al-Al Compressive Strength 6,400 psi ASTM D695 at 121°C, Al-Al Compressive Strength 480 psi ASTM D695 at 25°C Tensile Strength 5,200 psi ASTM D638 at 82°C Tensile Modulus 238 ksi ASTM D638 Elongation 4.2 % ASTM D638 Flexural Strength 8,400 psi ASTM D790 Flexural Modulus 277 ksi ASTM D790 T-Peel, anodized and primed Aluminum 41 pli ASTM D3167 at 25°C, 11-mil (0.279 mm) bond thickness
Glass Transition Temperature 61 °C DMA, E’ onset Hardness 70 Shore D ASTM D2250 Insert Shear Strength 1,500 psi BMS 5-107 As cured Insert Shear Strength 1,400 psi BMS 5-107 As cured + 30 days at 140°F (60°C), 95% R.H.
Packaging & Availability
- Packaging Type
- Regional Availability
Storage & Handling
- Storage Conditions
- EPIBOND® 420-A/B Epoxy Adhesives should be stored in a dry place in the original sealed container at temperatures between 2°C and 40°C (36°F and 104°F).
- Tightly reseal containers after each use. Under these storage conditions, the products have a shelf-life of 1 year (from date of manufacture).
- The components should not be exposed to direct sunlight.
- Storage Conditions
- EPIBOND® 420 A/B Epoxy Adhesives should be stored in a dry place in the original sealed container at temperatures between 2°C and 40°C (36°F and 104°F).
- Tightly reseal containers after each use.
- Under these storage conditions, the products have a shelf-life of 1 year (from date of manufacture).
- The components should not be exposed to direct sunlight.
Other
- Material Compatibility
- Physical Form
- Product End Uses
- Application Information
Value Units Test Method / Conditions Mix Ratio 0.4 %(W) Hardener : Resin - Physical Properties
Value Units Test Method / Conditions Density 1.05 g/cm³ ASTM D792