Products

AGOMET® F 307 A/B is a two-component, room-temperature curing, "no-mix" methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 3 minutes. As early as 8 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 307 A/B have less shrinkage during curing than most other AGOMET® F series.

AGOMET® F 330 / HARDENER Lacquer 2 is a "no-mix" room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Lacquer 2 show good tensile shear and peel strengths, as well as good temperature resistance.

AGOMET® F 330 / HARDENER Paste is a room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has a pot life of approximately 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Paste show good tensile shear and peel strengths, as well as good temperature resistance. The product can fill gaps of up to 5mm.

AGOMET® F 330 / HARDENER Powder with hardener powder or hardener paste is a room-temperature curing methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has a pot life of approximately 10 minutes. As early as 20 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 2 hours. Bonds produced with AGOMET® F 330 / HARDENER Powder show good tensile shear and peel strengths, as well as good temperature resistance. The product can fill gaps of up to 5mm.

AIROUT™ Release Agent is used to remove entrapped air from epoxy, polyurethane, and other polymer resin systems, preventing bubbles or voids in castings or coatings. This material helps reduce surface defects such as orange peel and cratering in coatings. It can be effectively used in solvent-based, water-based, or 100% solid resin systems without degrading the physical, electrical, or adhesive properties of the base resin.

ARA DEFEND® 50100 A/B RESIN SYSTEM is a low-viscosity, highly toughened resin system with a long injection window, enabling the manufacture of large parts. It is specifically developed for direct process applications and infusion at ambient temperatures.

ARADUR® 100 X 60 is a chemical blend from the polyamidoamine family, used in hot melt and solventborne coating applications, providing enhanced performance in various industrial coating processes.

ARADUR® 100 XM 60 is a very high viscosity polyamidoamine hardener dissolved in xylene/methoxy propanol.

ARADUR® 115 is a chemical blend from the polyamidoamine family, used in cold-curing core processes. It is compatible with metal, mineral substrates, and steel, offering enhanced adhesion and performance for these materials.

ARADUR® 115 X 70 is a high-viscosity polyamidoamine hardener dissolved in xylene.

ARADUR® 115-2 X 70 US Hardener is a high molecular weight polyamide supplied at 70% solids in xylene. This hardener is suitable for the formulation of two-component, ambient-cure marine and maintenance coatings.

ARADUR® 115-3 is a high-viscosity polyamidoamine hardener.

ARADUR® 115-3 X 70 is a high-viscosity polyamidoamine hardener dissolved in xylene.

ARADUR® 115-4 X 70 is a liquid polyamidoamine blend from the chemical mixtures and blends family, designed for use in various industrial applications requiring robust bonding and durability.

ARADUR® 1205 is a chemical blend used as a hardener in industrial additive applications, providing enhanced performance and durability in various curing processes.