Products

ARALDITE® 1644 A/B is a very low-density, room-temperature curing epoxy syntactic designed for edge sealing, void, and gap filling of honeycomb structures. The core filler is characterized by its combination of low density and high compressive strength.

ARALDITE® 2035 A/B adhesive is an extrudable, two-component, room temperature curing epoxy adhesive designed for service temperatures up to 400°F (204°C). This product is suitable for bonding a wide variety of materials such as metals, composites, and many other dissimilar substrates. The combination of high shear strength and compression makes this adhesive well suited for transportation, oil and gas, general industrial applications, and other applications requiring high-temperature performance. ARALDITE® 2035 A/B adhesive offers a rapid build-up of strength with an easy-to-process mix ratio.

ARALDITE® CA 125-1 KIT is araldite medium setting adhesive paste number 125 is a specially formulated, pre-filled epoxy paste, suitable for use where a sag resistant adhesive is required to produce high strength permanent bonds

ARALDITE® CA 273-1 KIT is araldite medium setting adhesive paste number 125 is a specially formulated, pre-filled epoxy paste, suitable for use where a sag resistant adhesive is required to produce high strength permanent bonds

ARALDITE® CA 80 is a pre-filled epoxy grout, specially formulated as a liquid for use as a grouting material and for bonding new to old concrete.

EPIBOND® 215 A/B Adhesive is an extrudable, two-component, room temperature-curing epoxy structural adhesive designed for service temperatures up to 300°F (149°C). This adhesive is suitable for bonding a wide variety of materials such as metals, composites, and many other dissimilar substrates. The combination of high peel strength and high shear makes this adhesive well suited for aerospace and other demanding applications. EPIBOND® 215 A/B structural adhesive can replace up to five competitive adhesives and is 75% lighter than mechanical fasteners.

EPIBOND® 315 A/B Adhesive is an extrudable, two-component, room-temperature curing epoxy adhesive designed for service temperatures up to 400°F (204°C). This product is suitable for bonding a wide variety of materials, such as metals, composites, and many other dissimilar substrates. The combination of high shear strength and compression makes this adhesive well-suited for aerospace applications and composites requiring a liquid shim. EPIBOND® 315 A/B offers rapid strength build-up with an easy-to-process mix ratio.

EPIBOND® 315M A/B is a two-component epoxy adhesive that contains MIRALON® carbon nanotube pulp for decreased electrical resistance for ESD applications. This product is suitable for bonding a wide variety of materials such as metals, composites, and other dissimilar substrates.

EPOCAST® 1614-A3 Epoxy Structural Syntactic Adhesive is a flame-retardant, low-density, frozen, one-component material used to reinforce honeycomb composite parts requiring high compressive strength at elevated temperatures up to 350°F (177°C). This material has been qualified to NTR-MS 1301A Ty II, CL IV, GR F, and RMS 027 Type XII specifications and meets the requirements of BMS5-28, Ty 14, CL 1 & 2, and other specifications. EPOCAST® 1614-A3 Epoxy Structural Syntactic Adhesive does not contain any SVHC (Substance of Very High Concern) as defined under REACH.

EPOCAST® 1627-2 Epoxy Syntactic is a high-performance, filled, structural core-reinforcing compound with an extremely low coefficient of thermal expansion, making the material suitable for use in fabricating and reinforcing composite structures. The epoxy syntactic is supplied as a gray-colored, frozen patty (32 or 64 in³ / 524 or 1049 cm³) or Semco cartridge (6 oz or 32 oz), which is ready to use after thawing and does not require weighing or mixing. EPOCAST® 1627-2 is qualified to BMS 5-21, Type 2, specification.

EPOCAST® 1635-A/B epoxy syntactic is a two-component, high-performance material designed for refilling mis-drilled holes in composite parts. This aluminum-filled, high-viscosity system exhibits outstanding compressive strength and dynamic fatigue resistance under load at elevated temperatures. This product is qualified to BMS 5-28, Type 31.

EPOCAST® 1652-A/B is a low-density system with good elevated temperature performance after a room-temperature cure. The epoxy syntactic is suitable for core filling metal skins, adding stiffness and strength to fabricated parts such as helicopter rotor blades, core splicing, and strengthening radii and corners of reinforced plastic structures. EPOCAST® 1652-A/B is qualified to Grumman GM 4006, Gulfstream GMS 4005, and Sikorsky 9587, Type 2.

EPOCAST® 54-A/B laminating system is an unfilled, solvent-free, easy-to-handle product. It is self-extinguishing and well-suited for the manufacture and repair of composite structures. In addition to laminating applications, the epoxy system can be used for filament winding. EPOCAST® 54-A/B epoxy laminating system is qualified to AIMS 04-27-000-01.

EPOCAST® 938-A3 Epoxy Structural Syntactic Adhesive is a frozen, one-component, flame-retardant compound designed for reinforcing honeycomb structures. EPOCAST® 938-A3 Epoxy Syntactic features high compressive strength at 350°F (177°C). Once thawed, EPOCAST® 938-A3 Syntactic is a thixotropic paste that can be easily dispensed from the cartridge using suitable pneumatic dispensing equipment. EPOCAST® 938-A3 Syntactic is qualified to BMS5-21, Type 1 classes 1; SMS 116201, Type 2; RMS 027, Type X; and others.

Thermal and vibration: Full density (FD), lightweight foam technology for the potting and fixation of cells mounted in EV batteries or as moldable encapsulants in battery modules or packs. This technology can be used via common polyurethane dispensing process or pre-fabricated.